Brushless DC Pump DC40C

Impeller: Closed Impeller

Dimension: 88.5x81.5x43.8mm

Max head:: 6M

Weight: 235g

Rated voltage: 12Vdc or 24Vdc

Max flow: 15L/MIN



1Dimension and weight88.5mmx81.5mmx43.8mm; 235g
2Installation dimension88.5mmx81.5mmx56mm;
3External diameter of outlet1/2’’ thread(M20mm)
4External diameter of inlet1/2’’ thread(M20mm)
5Driving mechanismBrush-less, magnetic isolated design
6Material of pump shellABS,PES/SPS/PPS/PA66+30%GF (Optional)
7Condition of useCan continuously work, submersible or land use (not self-priming)
8Suitable mediumWater, oil, or normal acid/ alkaline liquids
(Pre-test needed for special liquid)
9Max working temperature60℃
10Power consumption2.5W~28.8W
11Rated voltage12Vdc or 24Vdc
12Working voltage range5Vdc ~ 12Vdc(Max 14V) or 5Vdc ~ 24Vdc(Max 26V)
13Max load current1.2A
14Max horizontal flow rate15L/MIN   
15Max static lift6M                                           
16Noise class<40dB
17Waterproof classIP68(suitable for submersible installation)
18Life spanCan be more than 30,000hrs
19Power supplySuitable for solar panel, batteries, adapter or other power source
20Protection functiondry-run protection, stuck protection(customized function)
21Power regulation functionSpeed can adjustable by PWM signal, 0~5V analog signal or potentiometer (customized function)
22Featuresmall size with high efficiency,maintenance-freeUse ceramics shaft and carbon fiber sleeveCompletely water proof (IP68)Brush-less dc control without pollution, long life spanOEM and ODM service acceptOffer Pump related control system design

Electrical parameters (only for reference,parameters can be customized for specific requirements)

Model No.VoltageMax load currentMax static liftMax flow ratePower consumption

Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids.

When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current).

The head means the Max vertical lifting height of water,the flow is 0L/MIN@max head.

The max flow rate means flow rate with no lifting height(according to the curve bellow)

Dimensions of pump