|1||Dimension and weight||103.5mmx107mmx64mm;480g|
|2||External diameter of outlet||20mm|
|3||External diameter of inlet||20mm|
|4||Driving mechanism||Brushless, magnetic separation|
|5||Material of pump shell||ABS,PES/SPS/PPS/PA66+30%GF (Optional)|
|6||Condition of use||Can continuously work, submersible or land use (not self-priming)|
|7||Suitable medium||Water, oil, or normal acid/ alkaline liquids|
(Pre-test needed for special liquid)
|8||Max working temperature||60℃(for T sub-series) or 100℃(for S/A sub-series)|
|9||Power consumption||2.5W~45.6W(for T sub-series) or 2.5W~86.4W(for S/A sub-series)|
|10||Rated voltage||12Vdc or 24Vdc|
|11||Working voltage range||5Vdc ~ 12Vdc or 5Vdc ~ 24Vdc|
|12||Max load current||2.1A (for T sub-series) or 3.8A(for S/A sub-series)|
|13||Max horizontal flow rate||36L/MIN(for T sub-series) or 41L/MIN(for S/A sub-series)|
|14||Max static lift||4M(for T sub-series) or 6.5M(for S/A sub-series) |
|15||Noise class||IP68(suitable for submersible installation)|
|16||Waterproof class||Can be more than 30,000hrs|
|17||Life span||Can be suitable solar panel, batteries, source adapter or other power module|
|18||Power supply||Water protection, dry-run protection, stall protection, stuck protection|
(functions are optional for customization)
|19||Protection function||Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization)|
|20||Power regulation function||IP68(suitable for submersible installation)|
|21||Feature||1、Small size, high efficiency, maintenance-free, low consumption, strong anti-jamming ability, stable performance|
2、Brushless with no pollution, adopts high-performance ceramics shaft and high-precision carbon fiber sleeve together (stainless steel shaft optional for reducing cost)long life span
3、Stator and control circuits are completely sealed by epoxy resin completely separated with rotor, waterproof, avoided water-leakage problem which long exists in normal DC motor pump products
4、Protection functions can be customized such as lock protection, dry-run protection and so on.
5、Wide range of working voltage; parameters can be adjustable, e.g. 12VDC pump can have lift of 1m and lift of 3m with the same pump body.
6、For A/S sub-series,soft-start without impact,can be directly powered by solar panel; circuit parts and motor parts completely separated, no electronic components inside pump body; pump body is made of high-temperature-resistant material, so pump can continuously work at fluid with high temperature (as high as 100C); have several protection functions, such as impeller&rotor lock protection, polarity reverse-connected protection, over-load protection, over-current protection, etc.
7、For A sub-series, it's easy to regulate the power/speed of pump via PWM signal/ 0~5V analog signal/ potentiometer; flow rate & lift can be smoothly adjusted
8、Reduced the mortality to 0.05% after long-time study by R&D dep.
9、Lift of pumps can be doubled when they are connected in series
10、Suitable for submersible installation or land use (should be located below fluid level)
11、Offer ODM serve for pump and other controller system