BLDC submersible pump

3 year warranty

图片关键词

       

Instructions 

  •  Steady flow Mode(20 levels)

The pump will work in this mode when powered on.you can change the speed by the key of “speed”.when the indicator screen shows the number “101”, that means you have chosen the lowest flow rate when the indicator screen shows the number “120”, that means maximum flow rate.

  • Wave making Mode(20 levels):

The wave was generated by the changing of flow rate(from starting flow to max flow) and need two-step of settings: Starting flow and Wavelength.
1). Starting Flow: Before working in wave mode, you should adjust the starting flow(Mode 1) into minimum 103 (the starting flow 500L/H), 110 the starting flow 1500L/H.Maximum starting flow 115(3500L/H)
2).Wavelength: After the setting of mode 1, press the key of “mode” into mode 2(wave mode), the press speed to change the wavelength(20 levels).

  •  Feed mode:

Press the key “Feed” till the indicator screen shows the number “410”. When the number “410” comes out, that means you have chosen Feed Mode successfully. And then the wavemaker will stop working for your feeding fishes. Meantime, the indicator screen starts the countdown when it shows the number“410”. The countdown is 10 minutes. When the screen shows the number “400”, that means the count down is over and the wave maker restarts its working.

  • DC pump with wave mode               

  • Separate control

  • Silent                                                 

  • Low consumption

  • Small body with big flow

  • High pressure

  • Two years Warranty


在线预定

Telephone
Product list
Mall